Danfoss VACON NX, Application Manual

Page: 216 / 360

•
•
•
•
•
•
100%
ID349
0
e
3
0
b
h
0
4
6
.1
0 A
B
C
Illustration 64: Reducing Torque Supervision Limit
A Torque limit
B Signal range
C Free analogue input
10.147 (ID 403) Start Signal 1
Location in the menu: P2.2.7.1 (Multi-purpose Control Application)
Use this parameter to select the digital input signal (Control Signal 1) that starts and stops the drive when the control place is I/O A
(FWD).
TTF programming method must be applied to this parameter (see
10.626 "Terminal to Function" (TTF) Programming Principle ).
Default programming A.1.
10.148 (ID 404) Start Signal 2
Location in the menu:
P2.2.7.2
(Multi-purpose Control Application)
Use this parameter to select the digital input signal (Control Signal 2) that starts and stops the drive when the control place is I/O A
(REV).
TTF programming method must be applied to this parameter (see
10.626 "Terminal to Function" (TTF) Programming Principle ).
Default programming A.2.
10.149 (ID 405) External Fault Close
Location in the menu:
P2.2.7.11 (Multi-purpose Control Application)
P2.2.6.4 (Pump and Fan Control Application)
Use this parameter to select the digital input signal that activates an external fault.
TTF programming method must be applied to this parameter (see
10.626 "Terminal to Function" (TTF) Programming Principle ).
Contact closed: Fault (F51) is shown and motor stopped.
10.150 (ID 406) External Fault Open
Location in the menu:
P2.2.7.12 (Multi-purpose Control Application)
P2.2.6.5 (Pump and Fan Control Application)
Use this parameter to select the digital input signal that activates an external fault.
TTF programming method must be applied to this parameter (see
10.626 "Terminal to Function" (TTF) Programming Principle ).
Contact open: Fault (F51) is shown and motor stopped.
10.151 (ID 407) Run Enable
Location in the menu:
P2.2.7.3
(Multi-purpose Control Application)
P2.2.6.6 (Pump and Fan Control Application)
AB296635287482en-000301 / DPD00903 216 | Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide