Danfoss VACON NX, Application Manual

Page: 266 / 360

See 10.386 (ID 852) Fieldbus Process Data Out 1 Selection .
10.394 (ID 861) FB Mode SlotD
Location in the menu: P2.9.36 (Multi-Purpose Control Application)
Use this parameter to select the fieldbus mode for slot D.
Selection
number Selection name Description
0 Normal -
1 Extended
Use this mode to extend process data IN and OUT from 8 to 16.
2 Fast
Use this mode to enable processing of fieldbus data at 1 ms level, excluding PD IN and OUT
data. 16 PD support included.
3 Fast PD
Use this mode to enable processing of all fieldbus data at 1 ms level. 16 PD support included.
4 Not controlling
Use this mode to prevent the slot from controlling the motor
10.395 (ID 862) FB Mode SlotE
Location in the menu:
P2.9.37
(Multi-Purpose Control Application)
Use this parameter to select the fieldbus mode for slot E.
Selection
number Selection name Description
0 Normal -
1 Extended
Use this mode to extend process data IN and OUT from 8 to 16.
2 Fast
Use this mode to enabled processing of fieldbus data at 1 ms level, excluding PD IN and OUT
data. 16 PD support included.
3 Fast PD
Use this mode to enabled processing of all fieldbus data at 1 ms level. 16 PD support inclu-
ded.
4 Not controlling
Use this mode to prevent the slot from controlling the motor.
10.396 (ID 876) Fieldbus Process Data In 1 Selection
Location in the menu:
P2.9.19
(Multi-purpose Control Application)
Use this parameter to select a parameter or monitoring value to be controlled from the fieldbus.
To control an item, enter the ID number of the item as the value of this parameter.
See
Table 46 .
10.397 (ID 877) Fieldbus Process Data In 2 Selection
Location in the menu:
P2.9.20
(Multi-purpose Control Application)
Use this parameter to select a parameter or monitoring value to be controlled from the fieldbus.
To control an item, enter the ID number of the item as the value of this parameter.
See
Table 46 .
10.398 (ID 878) Fieldbus Process Data In 3 Selection
Location in the menu: P2.9.21 (Multi-purpose Control Application)
Use this parameter to select a parameter or monitoring value to be controlled from the fieldbus.
To control an item, enter the ID number of the item as the value of this parameter.
AB296635287482en-000301 / DPD00903 266 | Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide