10.599 (ID 3569) Load Max Factor
Location in the menu:
P2.13.5.1.3
(Multi-purpose Control Application)
The several statistical data points (mean, minimum, maximum, and standard) from the baseline model can be combined into one
threshold value. Use this parameter to set the max factor in the threshold value. If the threshold value is zero, the max factor is not
used.
See the formula in
10.544 (ID 3511) Current Mean Factor
10.600 (ID 3570) Load Std Factor
Location in the menu:
P2.13.5.1.4
(Multi-purpose Control Application)
The several statistical data points (mean, minimum, maximum, and standard) from the baseline model can be combined into one
threshold value. Use this parameter to set the std factor in the threshold value. If the threshold value is zero, the std factor is not
used.
See the formula in
10.544 (ID 3511) Current Mean Factor
10.601 (ID 3571) Load Interpolation Type
Location in the menu:
P2.13.5.1.5
(Multi-purpose Control Application)
Use this parameter to select interpolation type for the notification threshold values across frequency points.
See figure in
10.548 (ID 3515) Current Interpolation Type
.
10.602 (ID 3572) Load Warning S1 Mode
Location in the menu:
P2.13.5.2.1
(Multi-purpose Control Application)
Use this parameter to select the warning S1 mode which is used for calculating warning S1 notification threshold.
Selection number
Selection name
Description
0
Absolute
Absolute value is considered as threshold
1
Offset
Calculates threshold as sum of the computed baseline data and the offset values
2
Factor
Calculates threshold as baseline data factor
10.603 (ID 3573) Load Warning S1 High
Location in the menu:
P2.13.5.2.2
(Multi-purpose Control Application)
Use this parameter to set the threshold value for computing the warning 1 high notification threshold. Threshold value range varies
based on warning mode selection. This limit is not used when value is zero.
10.604 (ID 3574) Load Warning S1 Delay
Location in the menu:
P2.13.5.2.3
(Multi-purpose Control Application)
Use this parameter to define how long time the actual value must be above the warning S1 notification level to trigger the warning
S1. This level is not used when delay is zero.
10.605 (ID 3575) Load Warning S2 Mode
Location in the menu:
P2.13.5.2.4
(Multi-purpose Control Application)
Use this parameter to select the warning S2 mode which is used for calculating warning S2 notification threshold.
Selection number
Selection name
Description
0
Absolute
Absolute value is considered as threshold
1
Offset
Calculates threshold as sum of the computed baseline data and the offset values
2
Factor
Calculates threshold as baseline data factor
AB296635287482en-000301 / DPD00903 | 303
Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide
Summary of Contents for VACON NX
Page 1: ...Application Guide VACON NX All in One drives danfoss com...
Page 2: ......
