Danfoss VACON NX, Application Manual

Page: 95 / 360

Index Parameter Min Max Unit Default ID Description
3 = Custom range
P2.2.4.4
AI3 custom minimum setting -160.00 160.00 % 0.00 144
-
P2.2.4.5 AI3 custom maximum setting -160.00 160.00 % 100.00 145
-
P2.2.4.6 AI3 signal inversion 0 1
-
0 151 0 = Not inverted
1 = Inverted
1
Use the Terminal to Function method (TTF) with these parameters, see 10.626 "Terminal to Function" (TTF) Programming Principle )
2
Remember to place jumpers of block X2 according to the selection (0, 1, 2 or 3). See the User Manual of the product.
Table 60: Analog Input 4 (Control Panel: Menu M2 -> G2.2.5)
Index Parameter Min Max Unit Default ID Description
P2.2.5.1
(1)
AI4 signal selection 0.1 E.10
-
0.1 152
-
P2.2.5.2
AI4 filter time 0.00 320.00 s 0.00 153 0 = No filtering
P2.2.5.3
(2)
AI4 signal range 0 3
-
1 154 0 = 0–10 V (0-20mA)
1 = 2–10 V (4–20 mA)
2 = -10V...+10 V
3 = Custom range
P2.2.5.4
AI4 custom minimum setting -160.00 160.00 % 20.00 155
-
P2.2.5.5 AI4 custom maximum setting -160.00 160.00 % 100.00 156
-
P2.2.5.6 AI4 signal inversion 0 1
-
0 162 0 = Not inverted
1 = Inverted
1
Use the Terminal to Function method (TTF) with these parameters, see 10.626 "Terminal to Function" (TTF) Programming Principle )
2
Remember to place jumpers of block X2 according to the selection (0, 1, 2 or 3). See the User Manual of the product.
Table 61: Free Analog Input, Signal Selection (Control Panel: Menu M2 -> G2.2.6
Index Parameter Min Max Unit Default ID Description
P2.2.6.1
Scaling of current limit 0 5
-
0 399 0 = Not used
1= AI1
2 = AI2
3 = AI3
4 = AI4
5 = FB Limit Scaling See group G2.9
P2.2.6.2
Scaling of DCbraking current 0 5
-
0 400
P2.2.6.3
Scaling of acc./ dec. times 0 5
-
0 401
P2.2.6.4
Scaling of torque supervision limit 0 5
-
0 402
P2.2.6.5 Scaling of torque limit 0 5
-
0 485
VACON
®
NXP drives only
AB296635287482en-000301 / DPD00903 | 95 Danfoss A/S © 2023.02
Multi-purpose Control Application
VACON® NX All-in-One
Application Guide