![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035086.webp)
4 - 4 8
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
This screen sets parameters that dictate what a system consists of and how the overall sys-
tem is being controlled. Any changes on this screen will greatly change the operation and
screen appearance of the system. Changes made on this screen will force a system restart
when returning to the <Home> screen.
The [Extruder] button shown on this page is to launch a popup window for configuration
of the extrusion control features of a TrueBlendExt system. This will not be discussed in
this document. For a TrueBlendExt manual contact a Conair representative.
The basic control parameters are:
Parameter
Default Range
Security
Description
Number of
Components
4
[1 : 12]
Service/ Stopped
Number of material component hoppers available on the
blender.
Product Model
TB45-4 [Various
Models…]
Service/ Stopped
Select the model of blender. The product model will set
various parameters for the number of feeders, batch size,
and minimum gate times.
Loading Enabled No
Yes / No
Service/ Stopped
Enable self-loading of the blender such that the blender
controls the load pump and receiver sequencing.
Note: This requires a feature licensing passcode and
additional hardware installation.
Self-Cleaning
System Available
No
Yes / No
Service/ Stopped
Enabled if the self-cleaning system is controlled by the
blenders primary PLC rack. Note: This option requires
additional hardware before it can be enabled.
Material Level
Sensors
Available
No
Yes / No
Service/Stopped
Enabled if there are proximity sensors mounted in the
component hoppers to detect material level.
Note: This option requires additional hardware before it
can be enabled.
(Continued)
Summary of Contents for TrueBlend SB-4
