![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035152.webp)
6 - 2
l Tr o u b l e s h o o t i n g
B e f o r e B e g i n n i n g
You can avoid most problems by following the recommended installation and maintenance
procedures outlined in this User Guide. If you do have a problem, this section will help you
determine what caused it and how to fix it.
Before you begin troubleshooting:
•
Find the wiring diagrams and other schematics that were shipped with your equip-
ment. These diagrams are the best reference for correcting a problem. The diagrams
also will note any custom features, such as special wiring or control options, not cov-
ered in this user guide.
•
Verify that you have all instructional materials related to the TrueBlend SB-4, its con-
trol systems and its components.
Additional details about troubleshooting and repairing specific components are in this
manual.
•
Verify that you have the user manuals for the equipment located upstream and down-
stream from the TrueBlend SB-4 system. Solving problems related to material coveyed
to the TrueBlend SB-4 or due to poor extrusion or injection quality may require trou-
bleshooting malfunctions or incorrect operating procedures on other pieces of equip-
ment on the production line.
A F e w W o r d s o f C a u t i o n
WARNING:
This machine should be adjusted and serviced only by qualified technical per-
sonnel who are familiar with the construction and operation of this type of equipment.
DANGER:
Voltage Hazard.
Always disconnect and lock out the main power supply before opening the TrueBlend SB-4
electrical enclosure. Troubleshooting procedures that require access to the electrical enclo-
sure while the power is on should be performed only by qualified electrical technicians who
know how to use electrical testing equipment and understand the hazards involved.
Improper corrective actions can lead to hazardous conditions and should never be attempt-
ed to sustain production.
Summary of Contents for TrueBlend SB-4
