![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035023.webp)
D e s c r i p t i o n l
2 - 1 1
2
Description
S P E C I F I C AT I O N S
GRAVIMETRIC BATCH BLENDERS
TRUEBLEND
TM
TB900-4 AND TB900-6
TPBX028-0911
MODELS
TB900-4
TB900-6
Performance characteristics
Batch size lb {g}
19.8 {9000}
19.8 {9000}
Maximum throughput rate lb/hr {kg/hr}*
3500 {1588}
2800 {1270}
Bin capacity - main ingredient ft
3
{liter}
4.4 {124.6}
4.4 {124.6}
Bin capacity - minor ingredient ft
3
{liter}
4.4 {124.6}
2.2 {62.3}
Maximum number of materials
4
6
Number of vertical discharge valves
4
6
Number/(size) of major bin valves
2 - (100 mm)
2 - (100 mm)
Number/(size) of minor bin valves
2 - (60 mm)
4 - (60 mm)
Dimensions
inches {mm}
A - Height above mounting plate
†
74.75 {1896}
74.75 {1896}
B - Hopper width and depth (square)
48.00 {1219}
48.00 {1219}
C - Overall depth
51.00 {1296}
51.00 {1296}
D - Control height
6.50 {165.1}
6.50 {165.1}
E - Control width
8.75 {222.3}
8.75 {222.3}
F - Control depth
6.75 {171.5}
6.75 {171.5}
G - Loader center distance
24.00 {609.6}
24.00 {609.6}
H - Loader center distance
24.00 {609.6}
18.00 {457.2}
I - Loader center distance
NA
11.19 {284.2}
J - Loader center distance
NA
15.00 {381.0}
K - Loader center distance
NA
33.44 {849.3}
Weight
lbs {kg}
Installed
550 {249}
550 {249}
Shipping
700 {318}
700 {318}
Voltage
total amps
115V/1 phase/60 hz
6.3
6.3
230V/1 phase/50 hz
3.2
3.2
Compressed air requirements
Discharge valves
90 psi @ 0.2 ft
3
/min {6 bars @ 0.09
liters/sec}; 1/4 in. NPT fitting
Maximum loader sizes
20 inch loaders - number of loaders
4
2
15 inch loaders - number of loaders
NA
2
8 inch loaders - number of loaders
NA
2
SPECIFICATION NOTES
*
Maximum throughput rates are based on 35 lb/ft
3
pelletized material,
using all standard valve sizes. Use of reducer inserts will lower the rate
shown.
Throughput rates are based on:
•
A 4-position blender recipe
of 20% regrind, 80% natural, 3%
color and 2% additive material.
•
A 6-position blender recipe
of 20% regrind, 80% natural, 3%
color at position 3, 2% additive at position 4, 3% additive at
position 5 and 2% additive at position 6.
†
The optional flow control valve will mount inside the chassis in the
space of the manual slide valve. Conair recommends using the option-
al flow control valve when mounting the blender on a stand, surge bin
or hopper.
‡
TB900-4 hopper positions three and four are supplied with
12-8 adapters with eight inch cover plates as standard. TB900-6
hopper positions three and six are supplied with 12-8 adapters
and eight inch cover plates as standard.
§
Numbers in top view drawings represent hopper positions.
Specifications may change without notice, consult with a Conair repre-
sentative for the most current information.
8 {203} sq.
16 {406} sq.
19-7/8 {505} sq.
3-15/16
diameter
{100}
MOUNTING INTERFACE
Dimensions
shown in inches
and {mm}.
Top view
§
Front view
Side view
Control
A
B
C
F
E
D
4 position
‡
6 position
‡
NOTE:
Side and front view drawings
are model TB900-6.
The bin positions change for a
TB900-4, see the top view.
1
6
5
4
Mixing chamber access door - this side of the interface.
Purchase the
optional
material drain chute
that readily installs to
the chassis opening of
the blender for
fast
and simple cleanout.
Mounting bolt hole size (8 holes) 9/16 inch {14.0 mm}.
Predrilled 8 x 8 and 16 X 16 mounting pattern as standard.
Drain chute
H
G
H
K
G
I
J
1
2
3
4
1
2
3
4
5
6
Summary of Contents for TrueBlend SB-4
