![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035132.webp)
4 - 9 4
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
Dosing Rate
This page shows the overall average amount of material fed per time for each component
hopper. When feeding volumetrically, these values will be used to determine the amount of
time the feed gate is open.
Component
This page shows the material feed table for the selected component hopper. A scroll bar is
provided to view all entries in the feed table.
A blender will have multiple material hoppers and each hopper will have its own diagnos-
tics. When first entering the component diagnostic screens the component 1 is always pre-
sented first. Along the right side of the screen are (4) ‘Selection’ buttons with the component
hopper names. The selected component hopper is represented as the depressed button. If
there are additional component hoppers there are additional previous and next buttons to
navigate through all component hoppers. The diagnostics shown will be for the selected
component.
Feed Table:
This section will present the feed table for the selected component hopper.
Feed Table
The system maintains a feed table for each component hopper in the system. The table is
used to determine how long the component gate should remain open in order to dispense a
given amount of material. The table consists of a number of entries. To see all entries in the
feed table, a scroll bar is provided along the left size of the table.
•
Time:
The amount of time in (ms) the component gate is open.
•
Weight:
The amount of material fed during the time the gate was open.
•
Average Weight:
The average amount of material fed over several feeds.
Below the table are values which represent the results of the last feed sequence for the com-
ponent gate.
NOTE:
These values represent an average material feed rate. Inconsistencies in material flow rate
and gate feeding characteristics are accounted for when feeding material volumetrically.
✐
(Continued)
Summary of Contents for TrueBlend SB-4
