![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035096.webp)
4 - 5 8
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
The basic shift settings are:
NOTE:
The duration of the shifts cannot sum to a value greater than 24 hours. Also the duration of
a shift should not overlap another shifts time. If two shifts are configured with overlapping
times, the shift that started first will be given priority.
✐
NOTE:
Shifts can span the midnight hour, but care should be taken as some reporting packages do
not properly recognize spanning midnight. Data for a shift started on the previous day may
be reported on the following days report. Care will have to be taken when selecting the
report time filter.
✐
Parameter
Default
Range
Security Description
Name
Shift 1
Shift 2
Shift 3
[various 11
char]
Setup
The name of the shift.
Start Time [HH]
0
0
0
[0:24]
Setup
The 24-hour clock starting hour of the shift.
Start Time [MM]
0
0
0
[0:59]
Setup
The starting minute of the shift.
Duration [HH]
24
0
0
[0:24]
Setup
The 24-hour clock duration in hours of the
shift
Duration [MM]
0
0
0
[0:59]
Setup
The duration in minutes of the shift beyond
the duration hour.
Enable
Yes
No
No
Yes/No
Setup
Enable this shift as a valid work shift.
Clear Shift Totals After Report No
Yes/No
Setup
Automatically clear the shift inventory totals at
the end of a shift.
(Continued)
Summary of Contents for TrueBlend SB-4
