![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035085.webp)
O p e r a t i o n l
4 - 4 7
4
Opera
tion
S e t u p S c r e e n s
( c o n t i n u e d )
S y s t e m D e v i c e
This group of screens is used to set system wide operational parameters. This includes sec-
tions for the parameters that define the physical configuration of the blender, the methods by
which production recipes are entered, and the severity and processing of alarm states.
System Device Sections
Info:
Shows a screen displaying the systems software version and date information, the cur-
rent time and date, and the licensing station identifier.
Control
: This section contains parameters that define the physical configuration of the sys-
tem, and how the overall system is being controlled.
Recipe:
Setup parameters that select the method with which target throughput data is
entered into the system by the user.
Relays
: This section contains parameters that configure and define several programmable
relay functions.
Alarm
: This section contains parameters that configure the severity and action of all alarms
in the system with respect to operating state (Stop, Manual, and Automatic).
Info
This screen provides basic system information about the version of firmware and the touch-
screen identification. It is the first screen presented when [Setup] is pressed on the <Home>
screen.
•
Date:
The current date and time reported by the system. This can be changed in the
setup of the <Panel> <Time> screen.
•
Station Identifier:
The station identifier is a six digit number unique to each touch-
screen system. It is used for obtaining license codes for system features that require an
unlock code in order to enable. The <Maintenance> <License> screen lists the Station
Identifier and the License Codes for all unlocked features.
•
Firmware Version:
The version of firmware currently installed.
•
Firmware Date:
The date the currently installed firmware was released.
(Continued)
Summary of Contents for TrueBlend SB-4
