![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035088.webp)
4 - 5 0
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
Relays
This page is used to set up the system configurable relays. Not all relays are user config-
urable.
Procedure to configure a relay:
1
Select a relay type to configure ‘Selected Relay’.
2
Enable / Disable the selected relay.
3
Select the IO Slot and Channel where the relay and the IO point reside.
The basic relay parameters are:
Parameter
Default Range
Security Description
Selected Relay
None/ Hand Control
Input/ System
Running Output/Job
Start Input
Select a relay to configure.
Enable Relay
-- /
No/
Yes/
No
Yes / No
Service/
Stopped
Hand Control Input, Manual relay in control
System Running Output Relay, on when running
Job Start Input, Automatic Job restart not enabled
Slot
[1:15]
Service/
Stopped
The PLC slot address for the X20 slice where the relay
function is connected.
Channel
No
[1:12]
Service/
Stopped
The IO or channel number for where the relay resides on
the slice.
(Continued)
Summary of Contents for TrueBlend SB-4
