![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035022.webp)
2 - 1 0
l D e s c r i p t i o n
S P E C I F I C AT I O N S
GRAVIMETRIC BATCH BLENDERS
TRUEBLEND
TM
TB500-4 AND TB500-6
TPBX027-1011
MODELS
TB500-4
TB500-6
Performance characteristics
Batch size lb {g}
11 {5000}
11 {5000}
Maximum throughput rate lb/hr {kg/hr}*
1500 {680}
1150 {522}
Bin capacity - main ingredient ft
3
{liter}
2.7 {76.4}
2.7 {76.4}
Bin capacity - minor ingredient ft
3
{liter}
2.7 {76.4}
1.35 {38.2}
Maximum number of materials
4
6
Number of vertical discharge valves
4
6
Number/(size) of major bin valves
2 - (100/60 mm)
2 - (100/60 mm)
Number/(size) of minor bin valves
2 - (30 mm)
4 - (30 mm)
Dimensions
inches {mm}
A - Height above mounting plate
†
63.00 {1600}
63.00 {1600}
B - Hopper width and depth (square)
40.13 {1026}
40.13 {1026}
C - Overall depth
43.00 {1092}
43.00 {1092}
D - Control height
6.50 {165.1}
6.50 {165.1}
E - Control width
8.75 {222.3}
8.75 {222.3}
F - Control depth
6.75 {171.5}
6.75 {171.5}
G - Loader center distance
22.00 {558.8}
14.88 {377.8}
H - Loader center distance
22.00 {558.8}
20.00 {508.0}
I - Loader center distance
NA
9.75 {247.7}
J - Loader center distance
NA
13.00 {330.2}
K - Loader center distance
NA
28.00 {711.2}
Weight
lbs {kg}
Installed
400 {182}
400 {182}
Shipping
520 {236}
520 {236}
Voltage
total amps
115V/1 phase/60 hz
6.3
6.3
230V/1 phase/50 hz
3.2
3.2
Compressed air requirements
Discharge valves
90 psi @ 0.2 ft
3
/min {6 bars @ 0.09
liters/sec}; 1/4 in. NPT fitting
Maximum loader sizes
15 inch loaders - number of loaders -
4
2
8 inch loaders - number of loaders -
NA
4
Top view
Front view
Side view
SPECIFICATION NOTES
*
Maximum throughput rates are based on 35 lb/ft
3
pelletized material, using all stan-
dard valve sizes. Use of reducer inserts will lower the rate shown.
Throughput rates are based on:
•
A 4-position blender
recipe of 20% regrind, 80% natural, 3% color and
2% additive material.
•
A 6-position blender
recipe of 20% regrind, 80% natural, 3% color at position
3, 2% additive at position 4, 3% additive at position 5 and 2% additive at
position 6.
†
The optional flow control valve will mount inside the chassis in the space of the
manual slide valve. Conair recommends using the optional flow control valve when
mounting the blender on a stand, surge bin or hopper.
‡
TB500-4 hopper positions three and four are supplied with 12-8 adapters with 8
inch cover plates as standard. TB500-6 hopper position two is supplied with a 12-8
adapter and an 8 inch cover plate as standard.
Specifications may change without notice, consult with a Conair representative for the
most current information.
Control
MOUNTING INTERFACE
A
B
C
F
E
D
4
3
4 position
‡
6 position
‡
1
NOTE:
Side and front view draw-
ings are model TB500-4.
The bin positions change for a
TB500-6, see the top view.
Dimensions
shown in
inches and {mm}.
3-5/32
diameter
{80}
16-3/16 sq.{411}
12 sq.{305}
8 sq.{203}
Mixing chamber access door - this side of the interface.
Purchase the
optional
material drain chute
that readily installs to
the chassis opening of
the blender for
fast
and simple cleanout.
Mounting bolt hole size (8 holes) 9/16 inch {14.0 mm}.
Predrilled 8 x 8 and 12 X 12 mounting pattern as standard.
Drain chute
H
G
H
G
I
J
1
2
3
4
1
2
3
4
5
6
K
Summary of Contents for TrueBlend SB-4
