![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035110.webp)
4 - 7 2
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
The protocols settings are:
Parameter
Default
Range
Security
Description
Modbus
TCP/IP
No
Yes/No
Service/ Stop
The Modbus protocol does not require an unlock code in order to
enable. Please refer to the Modbus protocol manual for the avail-
able tag list. The IP Address of the touch panel configured on the
<IP Address> screen is used by this protocol.
Profibus
No
Yes/No
Service/ Stop
The Profibus protocol requires additional hardware that must be
installed. This protocol also requires an unlock code to enable.
Profibus: Data
Byte Order
Big Endian Big Endian/
Little Endian
Service/ Stop
Select the data byte ordering for the profibus data stream.
EtherNet/IP
Protocol
No
Yes/No
Service/ Stop
The EtherNetIP protocol requires an unlock code in order to
enable. Please refer to the EtherNetIP protocol manual. The IP
Address of the touch panel configured on the <IP Address> screen
is used by this protocol. This interface also requires the IP Address
of the remote system be defined. This protocol will also require a
double reboot of the touch-screen. The first reboot will enable the
protocol, and the second reboot will acknowledge the remote sys-
tem’s IP address.
Opc Server
No
Yes/No
Service/ Stop
The OPC Server protocol does requires an unlock code in order to
enable. Please refer to the OPC Server protocol manual for the
available tag list and connection requirements. The IP Address of
the touch panel configured on the <IP Address> screen is used by
this system.
EtherNetIP
No
Yes/No
Service/ Stop
The EtherNetIP protocol requires an unlock code in order to
enable. Please refer to the EtherNetIP protocol manual. The IP
Address of the touch panel configured on the <IP Address> screen
is used by this protocol. This interface also requires the IP Address
of the remote system be defined. This protocol will also require a
double reboot of the touch-screen. The first reboot will enable the
protocol, and the second reboot will acknowledge the remote sys-
tems IP address.
EtherNetIP: IP
Address
0.0.0.0
[0:255]
Service/ Stop
The EtherNetIP interface also requires the IP Address of the
remote system be defined.
(Continued)
Summary of Contents for TrueBlend SB-4
