![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035124.webp)
4 - 8 6
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
Control
This page is used for setting up the loader’s addressing and type settings. Each loader has
its own set of settings. Select the loader by name using the selection buttons along the right
side of the screen.
The basic loader control settings are:
Advanced:
This button will present a popup window where additional less frequently used
parameters can be set.
The advanced loader control settings are:
Parameter
Default
Range
Security
Description
Name
Load x
[15 character string] Setup/Stopped
The name of the loader body
Loader Enabled
ON
ON/OFF
Service
Setting this to On will enable the loader. A setting of OFF
will disable the loader.
Loader Type
Variable
0.15/ 0.5/ 1.00/ 1.80 Setup/Stopped
The size of the receiver body.
Blower Address
Node ID
[1:255]
Setup/Stopped
This is the NodeID for the blending system where the
pump resides that services the loader body. If the pump is
on the remote blender, the NodeID will be that of the
remote blender. If the pump is local, the NodeID will be
the value of the current blender.
Loader Priority
4
[1:4]
Service
The sequence priority for the loader body. This determines
which priority queue is used for servicing the receiver.
Parameter
Default Range Security
Description
Load Request Input Slot
Various
[1:15]
Setup/Stopped
The X20 module address or position in the IO rack
for the input that is the load request signal.
Load Request Input Channel
Various
[1:12]
Setup/Stopped
The channel or position number of the input used for
load request signal.
Main Vacuum Valve Output Slot
Various
[1:15]
Setup/Stopped
The X20 module address or position in the IO rack
for the output that controls the main receiver valve.
Main Vacuum Valve Output Channel Various
[1:12]
Setup/Stopped
The channel or position number of the output used
for the main receiver valve.
(Continued)
Summary of Contents for TrueBlend SB-4
