![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035087.webp)
O p e r a t i o n l
4 - 4 9
4
Opera
tion
S e t u p S c r e e n s
( c o n t i n u e d )
Recipe
The Recipe setup parameters select the method by which target throughput values are
entered into the system.
The [Extruder] button shown on this page is to launch a popup window for configuration of
the extrusion recipe entry features of a TrueBlendExt system. This will not be discussed in
this document. For a TrueBlendExt manual contact a Conair representative.
The basic recipe parameters are:
Parameter
Default
Range
Security
Description
Recipe Entry
Method
Extrusion Injection / Extrusion
Service/
Stopped
The method of recipe entry can be tuned for
either industry. This setting is not required but is
an aid for setting up the recipe.
Component
Entry Options
Parts
Parts / Percent
Service/
Stopped
The correlation of component entry values and
whether the ratio must add to 100%.
Use Order
Names
No
Yes / No
Service/
Stopped
The system can show an order name on the mon-
itor screens or for reporting purposes.
Use Job Mode No
Yes / No
Service/
Stopped
Show [Job] button to allow blender operation in
Job Mode.
Use Resin
Names
No
Yes / No
Service/
Stopped
The system can keep track of overall resin usage
for each resin. This will require recipe entry to
include a resin selection for each component.
Feed Order in
Recipe
No
Yes / No
Service/
Stopped
Select Yes to have the order in which the com-
ponents feed controlled by the operator using
the recipe.
Density Part of
Recipe
No
Yes / No
Service/
Stopped
Select if the material density for each compo-
nent be included in the recipe.
Regrind Out of
Material
Action
Stop with
Alarm
Continue / Continue with
Alarm / Remove and
Continue / Stop with Alarm
Select the action the system take when the
regrind component hopper runs out of material.
(Continued)
Summary of Contents for TrueBlend SB-4
