Conair TrueBlend SB-4, User Manual, Page: 30 / 168

3 - 2 l I n s t a l l a t i o n
U n p a c k i n g t h e B o x e s
Upon receiving the shipment, always perform a thorough inspection of the contents and
compare it the enclosed packing list. Make sure all parts listed are present and that no visi-
ble damage exists.
Inspect all of the equipment in the presence of the freight carrier’s representative for dam-
age during shipment. Note any damage on the delivery receipt before signing it. If damage
is evident, file a claim immediately against the carrier as it is their responsibility to pay for
any damage incurred during shipping. Make sure to include a detailed report of the damage
along with photos.
The TrueBlend Blender arrives wrapped on a skid. The packaging could include (depends
on the options selected):
•
HMI operator panel
•
Control cable (to connect the control to the electrical cabinet).
•
Weigh bin
•
Slide gate (option)
•
User manual and wiring diagrams (not shown)
1
Carefully unwrap the blender and components on the skid.
2
Remove all packing material, protective paper, tape, and plastic.
3
Carefully remove the mixing chamber. Use the instructions on the sticker located
inside the door of the blender chassis to remove the mixing chamber.
4
Unbolt the blender from the skid.
5
Using the lifting lug provided, lift the unit off of the skid.
IMPORTANT:
Do NOT use excessive force. Forces that are exerted on the
load cell from outside when attaching and removing the weigh bin load cell may
damage the very sensitive load cell.
IMPORTANT:
Do NOT lift the blender except by using the lifting lug provided.
If the weight is unevenly distributed, the mixing unit may tip and injure people
when it is lifted.