![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035067.webp)
O p e r a t i o n l
4 - 2 9
4
Opera
tion
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
Totals
General Information
The blending system maintains the total material processed by each component hopper. The
component totals are summed together for a system total. The number of batches processed
is also accumulated. The <Totals> screens display the recipe, system, device, and if enabled
resin and order material consumption totals. For the system and component totals, three
types of totals are maintained: inventory, shift, and order totals. Separate buttons are provid-
ed to clear each of the totals in the system. The current security level can determine which
set of totals can be cleared by the user.
System Tools
Like other screens in the system, the totals screens can vary based on the system configura-
tion. For large blending systems it is not possible to show all component totals on a single
screen. For these systems a [Next] button is presented which when pressed will show the
totals for the additional component hoppers.
The totals screen displays the recipe, resin, system and device inventories. To access the
<Totals> screen from the <Home> screen, press the [Totals] button. Selection buttons on the
left side of the screen will allow selection of different material usage totals. Like other
screens in the system, the totals screens can vary based on the system configuration. If resin
names have been enabled then a selection button for viewing resin totals will be available.
•
System:
The blending system maintains the total weight of material processed by each
component hopper. The number of batches processed is also counted. Each of the
component material usage totals are summed together for a system total. Three types
of material consumption totals are accumulated in the system. The first is the running
total, labeled (Total Inventory). The second is called (Shift Totals) which allows users
to track material usage during a shift period. The third total if enabled through setup is
called (Order Totals). Separate buttons are provided to clear each of the totals main-
tained by the system. The current security level can determine which set of totals can
be cleared by the user.
•
Inventory Totals:
Inventory totals are intended on being a continuous running total of
material usage. The security level for clearing the inventory totals is configurable in the
security section of <Setup, Panel, and Security>. The default security level setting is
(SETUP). When clearing the totals, a confirmation popup is presented which also
shows the last 5 accumulated values before being reset. Pressing (YES) to clear the
totals will clear the totals for all components and the number of batches processed. The
system total will be added to the list of previous totals, and the oldest item in the list
will be removed. Pressing (NO) will exit the popup without clearing the totals.
•
Shift Totals:
Shift totals are intended on being cleared by the user or automatically at
the change of shift. The security level for clearing the shift totals is configurable in the
security section of <Setup, Panel, and Security>. The default security setting is
<Operator>. When clearing the totals, a popup is presented which shows the last 5 of
cleared instances values. Pressing (YES) to clear the totals will clear the accumulated
shift totals for all components and the number of batches processed. The system total
will be added to the list of previous totals, and the oldest item in the list will be
removed. Pressing (NO) will exit the popup without clearing the totals.
(Continued)
Summary of Contents for TrueBlend SB-4
