![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035062.webp)
4 - 2 4
l O p e r a t i o n
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
To generate a scheduled report:
1
In the (Scheduled) section, select the type of report to be generated from the pull-
down menu.
2
Select the format of the report output from the pull-down menu.
Either a formatted
report output with data properly column aligned, or a comma separated file format where
each data value is separated by a comma.
3
Enable or Disable the schedule report using the Schedule Report pull-down.
4
Select the report destination.
The report destination pull-down will update with the out-
put options based on what hardware is currently available. The system will show the
available drive space for the destination selected. If the space exceeds 4 Gigabytes, the
value shown will be ‘>4Gb’.
5
Press the [Run Report] button to generate the report.
When complete the report will
be shown in a Report View popup window.
6
Pressing the (Schedule) button will present a popup window, to enter the report
schedule.
7
Enter the Report Start time.
This value is the time (24 hour clock) that the report
should first be generated.
8
Enter the Report Interval time. This value is the amount of time (24 hour clock)
between the last generated report and the next.
9
Press the back button to close the schedule popup.
10
Press the [Save] button to save the schedule report settings.
Schedule:
Present a popup window where the report times are scheduled.
Save
: Save the selected report parameters as shown.
NOTE:
Do not specify the file extension! The file extension
will be added when the report is generated.
✐
(Continued)
Summary of Contents for TrueBlend SB-4
