![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035138.webp)
5 - 4
l M a i n t e n a n c e
C h a n g i n g M a t e r i a l i n a B l e n d e r
C o m p o n e n t
Detachable material hopper procedure
For models TB 45 (4 bins) and TB100 (2 bin models) and TB250R (2 bins).
All detachable material hoppers are held in place with a captive retainer (screw) attached
to the hopper support frame. The retainer stabilizes the detachable hopper when mount-
ed on the blender support frame from forces exerted on the hopper by resin weight and
various types of automatic loading/receiving devices during normal vibration from the
process. There is a separate retainer for each detachable hopper.
To remove any of these detachable hoppers for cleaning or material changeover:
1
Remove the automatic loading/receiving device.
2
Use the proper hex head socket or screwdriver to loosen the captive
retainer.
3
Carefully remove the hopper.
To reinstall the hoppers, simply reverse the above steps. Once
the hoppers have been placed and anchored, the loading/receiving
devices can be mounted.
Captive retainer
NOTE:
Upon reinstalling the detachable hopper, it is very important to
re-anchor the respective hopper(s) using the captive retainer to provide
stability during normal operation of the blender.
✐
(Continued)
Summary of Contents for TrueBlend SB-4
