![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035070.webp)
4 - 3 2
l O p e r a t i o n
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
Recipe
The recipe screens are provided to enter the (Production Recipe) or target set values which
the blender will attain. The method of recipe entry will change based on the setup of the
system. It is impossible to have all variations available on a single screen. Therefore the
recipe entry could involve more than a single screen. To present the recipe entry screen in
order to enter a ‘New Recipe’, press the [Recipe] button on the <Home> screen. It is also
possible to configure a security level for the [Recipe] button.
Whenever the user edits a ‘New’ recipe, a temporary recipe is being edited. It is not being
sed to control the system. When a recipe parameter is changed, the [Automatic] button
shows a ‘Yellow’ indicator and the button text display [Commit]. This is an indication that
the recipe has changed and the blender is NOT processing the changed recipe. The system
will control the blender according to the ‘New’ recipe values, only after the [Commit] but-
ton is pressed. When the [Commit] button is pressed the ‘New Recipe’ is validated for any
errors that would prevent the blender from being able to process it.
•
If there is an error with the ‘New Recipe’, the [Recipe Alarm] button will become vis-
ible. The ‘New Recipe’ will NOT become the current/processing recipe. The recipe
errors must first be corrected.
•
If there are no errors with the recipe, the system will go into (Automatic) and process-
ing will begin. The New Recipe is copied to the Set/Current Recipe and the system
will control the process accordingly. The [Commit] button will change to the
[Automatic] button. The new recipe name will be shown in the status section at the
bottom of each screen.
Recipe Entry Screens
The recipe entry screen is provided to enter the target set values for the systems automatic
operating state. These screens are highly dynamic and depend upon the configuration cho-
sen in <Setup>. The recipe entered here is a temporary recipe called the ‘New Recipe’ or
‘Next Recipe’.
The ‘Recipe Book’ contains any stored recipes. In the ‘Recipe Book’, recipes can be edited
or viewed without affecting the current running recipe. The proper security level must be
met in order to store recipes/resins, or edit recipes/resins in the recipe book.
Previous/Next
A total of six component hoppers are all that can be displayed on a single screen. For sys-
tems with more than six components, a [Previous/Next] button is provided in the upper
right corner of the screen for navigation to the additional component hoppers.
Recipe Name/Number
In the top center of the recipe entry screen is shown the next recipes name and number.
This is by default named (Recipe 1) and (1) respectively. If a recipe has been selected from
the recipe book, then the selected recipe’s name and number will be shown in these fields.
(Continued)
Summary of Contents for TrueBlend SB-4
