![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035084.webp)
4 - 4 6
l O p e r a t i o n
( C o n t i n u e d )
S e t u p S c r e e n s
( c o n t i n u e d )
Component
: This device represents the component material hoppers. All control parame-
ters for the feed gates and alarm tolerances can be configured.
Batch Hopper:
This device is the central batch hopper where the component hopper gates
feed material. The setup parameters found here provide control, alarm tolerances, and load
cell calibration data.
Mixer
: This device resides below the central batch hopper and is where the batch material
is mixed. Parameters found here control the mixing process, and when the mixer gate needs
to be opened.
Network
: This device provides for configuration and setup of remote communications and
networking support.
Maintenance
: This area provides various support functions for file IO, licensing, and
Manual Control of the blender.
Loader
: This device provides for configuration and setup for the loader bodies when the
TrueBlend system is configured to have self-loading capabilities.
Blower
: This device provides for configuration and setup for the pump or blower when the
TrueBlend system is configured to have self-loading capabilities.
More…
: Simple button to provide access to more devices and areas of setup.
Diagnostics
: {Service} This button provides access into the blender diagnostics support
sections. The user must have service level security in order to enter the system diagnostics.
(Continued)
Summary of Contents for TrueBlend SB-4
