![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035123.webp)
S e t u p S c r e e n s
( c o n t i n u e d )
Loader
The loader setup screens are used to set parame-
ters that are relevant to the loading receiver bod-
ies. Settings are further grouped into categories,
System, Control, and Times. A system will have
multiple loader bodies and each has its own set
of parameters. When first entering the loader
setup screens the loader 1 is always presented
first. Along the right side of the screen are (4)
‘Selection’ buttons with the loader body names.
The selected loader body is represented as the
depressed button. If there are additional loaders
there are additional previous and next buttons to
navigate through all loader bodies. The set
parameters shown will be for the selected loader.
Loader Device Sections
System:
This page is for setting up the number of loader bodies available.
Control:
This screen sets parameters which control the physical configuration of the loader
body.
Time:
This screen sets parameters for controlling the loading and dumping times for the
selected loader body.
System
This page is for setting up the number of loader bodies available.
The basic loader system settings are:
Parameter
Default
Range
Security
Description
Number of Loaders 4
[1:12]
Service/Stop
The number of loader bodies serviced by this blender.
O p e r a t i o n l
4 - 8 5
4
Opera
tion
(Continued)
Summary of Contents for TrueBlend SB-4
