![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035049.webp)
O p e r a t i o n l
4 - 1 1
4
Opera
tion
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
Job Mode
In ‘Job Mode’ the blender will run producing a blend for a set amount of material and then
stop. The ‘Job Mode’ indicator box shows the set and actual batch totals as well as the per-
cent completion. Pressing this [Job] button, the user will be presented with a popup window
where ‘Job Mode’ may be enabled/disabled and the target weight can be edited. If the indi-
cator box is not shown, then ‘Job Mode’ has been disabled. For further details on the ‘Job
Mode’ of operation, refer to the Recipe – User Interface Screens, Recipe screen.
Command Bar
Automatic
– Places the Blender into automatic operation. This action requires a valid recipe
be entered from the Recipe screen. The button will show a green indicator if in automatic. If
the recipe has been changed, the button appearance will change to the [Commit] button.
Stop
– This button is used to put ‘only’ the blender into a stopped state. The button will
show a red indicator if stopped.
Commit
– The [Automatic] button will change to a [Commit] button whenever the recipe
has been modified and is not yet the running recipe. Pressing the [Commit] button will
implement the changes to the recipe.
Recipe
– Navigate to the recipe entry screen.
Security
– Navigate to the security passcode entry screen.
Setup
– Navigate to the setup screens.
Report
– Navigate to the report generation screen.
(Continued)
Summary of Contents for TrueBlend SB-4
