![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035036.webp)
3 - 8
l I n s t a l l a t i o n
Te s t i n g t h e I n s t a l l a t i o n
You have completed the installation. Now it’s time to make sure everything works.
1
Make sure there is no material in the bender.
If you have mounted loaders on the
blender, disconnect the material inlet hose at the source.
2
Turn on the main power to the blender.
Make sure the blender’s disconnect dial is in
the ON position. This powers up the control and the display lights will illuminate.
S y s t e m C o n f i g u r a t i o n
The TrueBlend SB-4 system is a highly flexible and user configurable system. As such, it
has the ability to store a significant amount of data to completely describe your particular
process application and set-up. This system configuration data only needs to be entered
once as it is stored in battery backed memory. In addition, some of the configuration vari-
ables have default values which in most cases do not need to be changed. A configuration
worksheet has been provided in this manual (Appendix A) that can be filled-out so a written
log of the system configuration can be saved. Section 4 of this manual describes in detail all
of the parameters which can be configured.
See the Operation section entitled, Menus-
System Setup
of this manual.
P r e p a r i n g f o r E l e c t r i c a l I n s t a l l a t i o n
1
The operator touch screen for the TrueBlend SB-4 system should be conveniently
located for easy operator status.
2
Each component has been prewired at the factory, so only the wiring required to
interconnect all of the components must be performed in the field.
3
See the electrical drawings supplied with the system for exact connections required.
Summary of Contents for TrueBlend SB-4
