![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035064.webp)
4 - 2 6
l O p e r a t i o n
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
TBReports
TrueBlend Reports is a reporting option where the blending system outputs data via an
Ethernet connection using UDP protocol to a personal computer (PC) connected to the
same network as the blender. The PC contains a windows application TBReports provided
by Conair. This application will monitor the Ethernet port of the PC for UDP packet data
from the blender and add the data to files stored on the PC. The application can then be
used to generate comma separated data files that can be used for data analysis. The
TBReports reporting screen on the blender is used to configure what data is logged to the
PC.
Configuration of the touch-panels Ethernet addressing is performed in the [Setup –
Network] screen of the setup screens. This must be configured before communications with
the PC can be made. When the connection between the blender and TBReports on the PC is
operating correctly, the ‘Status’ text will update with the text ‘Connected’ and the back-
ground will turn Green.
Available output data includes:
•
Shift Inventory Report:
This data output will include the total material processed
during the specified interval. This report requires a start time and duration for the peri-
od.
•
Batch Report:
After the completion of each batch, the material processed in the batch
will be recorded.
•
Alarm Report:
The TrueBlend SB-4 alarm report can output certain alarm conditions
to TBReports, however not all alarm conditions supported can be processed by
TBReports.
•
Scale Report:
This is a run on request report that outputs the status of the weigh
scale.
•
Recipe Book:
This report is a run on request report that outputs the stored recipes.
Note that SB-4 blender supports recipe features not supported by TBReports, so the
full recipe may include data not reported by TBReports.
(Continued)
Summary of Contents for TrueBlend SB-4
