![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035037.webp)
I n s t a l l a t i o n l
3 - 9
3
Installa
tion
Tr u e B l e n d S B - 4 B a t c h H o p p e r
C a l i b r a t i o n
1
Turn power on to the blender. Once the controller display comes on and the blender
overview screen is displayed, continue with the calibration.
2
Press the Setup button on the touch screen.
The TrueBlend SB-4 setup screen will
appear.
3
Press the Batch Hopper button, located at the right side of the screen.
The next screen
to appear will be the Set up screen for the batch hopper.
4
Press the Calibrate button on the left side of the screen.
5
Press the Manual Calibrate button.
It is a good idea to re-calibrate the unit after it has
been transported and mounted. Re-calibrating the unit assures that the start weight on the
scale inside the blender is zero.
6
Press the ‘OK’ button to obtain the Zero Weight Calibration Factor.
Please stand by,
while the system obtains the Zero Weight Calibration Factor.
7
Enter the Test Weight Value, then press ‘OK’.
8
Place the test weight into the hopper and press ‘OK’ to continue with the calibration.
Stand by while the system obtains the Test Weight AD Value.
9
Stand by while the system obtains the Test Weight AD Value.
10
Remove the test weight from the hopper.
11
Press the Home button to return to the Home screen.
✒
Tip:
The weigh bin must be in place, and empty, when you perform this task. If the bin is not in place,
the calibration will be inaccurate and will need to be redone.
NOTE:
The test weight value should not exceed the maximum capacity of the weighing system.
✐
Blender Model
Test Weight Grams
Test Weight Part Number
TB45
1 kg
26702901
TB100
1 kg
26702901
TB250
5 kg
26702902
TB500
5 kg
26702902
TB900
10 kg
26702903
TB1800
10 kg
26702903
TB2500
10 kg
26702903
TB3500
10 kg
26702903
Summary of Contents for TrueBlend SB-4
