![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035063.webp)
O p e r a t i o n l
4 - 2 5
4
Opera
tion
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
Logging Data
Process data can be logged to files either on the internal drive or a USB thumb drive. Each
data record consists of a single line of data that is comma separated. The first line of each
file is a header line which contains the column headings for the data lines to follow. Each
day a new file is created, and a date code is concatenated with the filename. Once the data
drive is full, data logging will stop and an alarm will be shown in the alarm list. For data
files located on the internal drive, a simple FTP client can be used to manage the files.
•
Batch Data
: For every batch of material the blender makes, the amount of material,
the type of material, and other component statistics are saved. NOTE: Each data line
will be contain approximately 70 bytes + (50 bytes * Number of Components).
•
Inventory Data
: Current inventory totals of the system and components. The invento-
ry totals for all devices will be saved whenever the system powers up, every set inter-
val, and when the <Auto> or <Stop> button is pressed. The interval period can also be
set.
•
Recipe Data
: The current recipe is saved whenever the <Auto> or <Stop> button is
pressed.
•
Thicknes
: With TrueBlendExt if thickness mode is enabled, the calculated product
thickness is output according to the set interval.
To enable data logging:
1
In the (Logging) section, enable or disable the various logging options.
2
If Inventory logging is enabled, set the desired logging interval.
3
Enter a filename prefix for the data file. The date and extension will be concatenat-
ed to the prefix to create the final file name.
4
Select the destination for ALL data logging output.
The system will show the avail-
able drive space for the destination selected. If the space exceeds 4 Gigabytes, the value
shown will be ‘>4Gb’.
Parameter
Options
Description
Enable logging output
Yes / No
Enable / Disable the various data logging output reports.
Report / Data File Name LogData\<Report Name> The file name prefix for the resulting data file. The date and
extension will be concatenated.
Report Interval
60 (seconds)
Available for some report outputs, the frequency of which data is
output to the destination.
Select Destination
USB Port 1
USB Port 2
Compact Flash
The destination where the file output will be placed.
NOTE:
For the destination of logged data, a single destination is set for all data logging outputs.
✐
(Continued)
Summary of Contents for TrueBlend SB-4
