![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035118.webp)
S e t u p S c r e e n s
( c o n t i n u e d )
Access to the USB thumb-drive with an FTP Client is possible with a user login and pass-
word of (USB Port 1: Username: conairusb1, Password: conairusb / USB Port 2:
Username: conairuSB-4, Password: conairusb). Of course the USB stick may also be
removed. Do not remove the USB stick while data access is occurring.
Drive Explorer
From the pull-down menu, the ‘Drive Explorer’ is the first available selection. The Drive
Explorer will allow for the various drives to be scanned for files and directories. Buttons
are provided to allow for individual files or entire directories to be deleted.
To explore a drive:
1
Select the destination drive to explore.
The sub-directory selection box will populate
with all of the directories on the selected drive.
2
Select the sub-directory.
The file selection box will populate with all of the files in the
selected directory.
3
Select the desired file
.
Clear:
{Setup} This button will delete the selected file from the selected path.
Clear All:
{Setup} This button will delete all of the selected files from the selected path.
Reload:
This button will refresh the directory and file lists for the selected drive selection.
Data File Action
From the pull-down menu, various file IO operations can be performed. The list of opera-
tions available can change based on the configuration of the system.
For each action, the user will:
1
Select a source or destination drive.
2
Depending on the file action selected, the user can then select a directory.
3
Select or enter a filename, depending on the action taken.
4
Press the ‘OK’ button to perform the selected action.
OK/Run:
This button will execute the selected file action.
NOTE:
The USB stick CANNOT be formatted with NTFS, this is not supported.
✐
NOTE:
Take care when using multiple USB thumb-drives. The first USB thumb-drive inserted will
be referred to as USB Port 1, the second as USB Port 2. If the first thumbdrive USB Port 1
is removed, the remaining USB thumb-drive will still be referenced as USB Port 2.
✐
4 - 8 0
l O p e r a t i o n
(Continued)
Summary of Contents for TrueBlend SB-4
