![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035059.webp)
O p e r a t i o n l
4 - 2 1
4
Opera
tion
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
On demand reports are generated the moment the [Run Report] button is pressed. A
progress bar will be presented showing the progress of the report generation. Once the
progress bar vanishes, the report is complete. The report results will be immediately shown
in result popup window. If an error occurs during the process, a pop-up will be presented
indicating the error condition. The report output will be available at the destination location.
Available reports can include:
Alarm Log Report:
A report that lists the last 200 logged or historical alarm events. This report may take some
time to generate depending on the length of the historical alarm list. The following data is
included:
•
Event Time
•
Alarm State
•
Acknowledge Status
•
Device Name
•
Alarm Message
Active Alarm Report:
This report will output the entire list of current active alarms. For active alarms, only the
current state is listed. For non-current alarms, each is updated with the new status. Each
alarm will remain on the list until the alarm is cleared and acknowledged. The following
data is included:
•
Event Time
•
Alarm State
•
Acknowledge Status
•
Device Name
•
Alarm Message
Current Status Report:
This report prints out the current status of the system. First, the job name, if available is
shown. This is followed by the current recipe. The recipe values printed, match those
entered at the recipe screen page. In addition to the set values, the actual values are printed.
This is followed by the inventory and shift totals. For the shift totals, the percentage of the
material consumed over the shift is also calculated.
NOTE:
This report only prints out the recipe data at the time of the report.
✐
(Continued)
Summary of Contents for TrueBlend SB-4
