![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035108.webp)
4 - 7 0
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
Network Device Sections
IPAddress:
This screen is for the setup and review of the systems remote network configu-
ration.
Protocol:
This screen is provided to enable and set configuration parameters for a number
of remote communication protocols.
Serial Port:
This screen is provided to enable and configure remote communications that
rely on a physical serial port.
Email:
This section will configure the transmission of an email whenever an alarm occurs.
SQL Server:
This screen will provide configuration for connecting the blender to a remote
SQL server.
IP Address
This screen shows the touch-panels unique NodeID and Ethernet network addressing.
Whenever changes are made to these parameters, a reboot of the system will be performed
upon returning to the <Home> screen.
TCP/IP Settings
For the following parameters the current set values are shown along with fields for data
entry. Pressing the Set button next to each parameter will immediately change the system
set value. Navigating away from this page will also set the values in the system. Once set,
external devices will be able to ‘PING’ the touch-station, however a system reboot will be
performed upon exit of setup to insure full functionality of the change taking place.
The basic IP Address settings are:
Parameter
Default
Range
Security
Description
IP Address
10.1.44.1
[0:255]
Service/Stop
The Ethernet TCP/IP network IP address.
SubNet Mask
255.255.0.0
[0:255]
Service/Stop
The Ethernet TCP/IP subnet mask.
Test Weight AD Value
1
[0:255]
Service/Stop
The Ethernet TCP/IP gateway address if required.
(Continued)
Summary of Contents for TrueBlend SB-4
