![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035078.webp)
4 - 4 0
l O p e r a t i o n
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
Resin Selection / Names
If resins codes are enabled then for each hopper in the system, a resin data entry field will
be presented for the component on the <Recipe> - <Options> screen. The text of the field
will show the name of the selected resin for that hopper. To select a new resin, press the
data entry field.
A resin selector popup will be shown where the list of available resins can be viewed and
chosen. Select resins to be viewed in the list by using the scrollbar, the up/down buttons, or
simply typing the resin number into the selection field. It is also possible to touch the resin
name in the table itself to select a specific resin. The selected resin will be highlighted in
the table with an arrow pointing to it. It will also appear to the right of the table in the
selected resin box. There are a total of 255 resin locations available.
After verifying the resin and its density, press the select button to use the selected resin.
The density value is critical for extrusion control when it is necessary to control thickness,
ID, or OD.The density value will be entered into the ‘New Recipe’ and the resin name will
be shown on the <Options> screen.
•
Select:
Press [Select] to choose the displayed resin for the material component hopper
selected. The resin popup window will close automatically.
•
Edit:
The desired resin may not be available in the list. To edit a resin, press the [Edit]
button. This will unlock the fields defining the resin so that they may be edited. Each
resin has a name, a solid density, and a bulk density value. The solid density value
will be used by the system if (Density in Recipe) is enabled. The [Save] button is
pressed when complete to save the changes into the list. To edit a resin the operator
must have the necessary rights (Security level to save recipes and resins).
(Continued)
Summary of Contents for TrueBlend SB-4
