![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035098.webp)
4 - 6 0
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
The advanced component control settings are:
Alarm
This page is for setting up alarm settings for the gate feeder hopper. Each feed hopper has
its own set of settings. Select the feed hopper by name using the [+/-] buttons in the top left
corner of the screen.
Parameter
Default
Range
Security
Description
Large Table Resolution
(ms)
100
[5:999]
Setup/Stop The time difference in milliseconds between entries in
the feed table for large resolution feed rates.
Small Table Resolution
(ms)
10
[5:999]
Setup/Stop The time difference in milliseconds between the first 10
entries in the feed table for small resolution feed rates.
Settling Time (ms)
800
[0:9999]
Service
The amount of time the weighing system has to stabilize
after a feed before the weight reading is taken. This
ensures that a stable weight is available for analysis.
Dosing Rate (g/s)
Varies
[0:...]
Service
When operating in volumetric mode, this is the
grams/second value used to determine gate feed time.
Action when low level
material prox. sensor is
triggered
Continue Suspend/
Continue
Service
What action should the system take in the case the low
level proximity sensor in the hopper is triggered.
(Continued)
Summary of Contents for TrueBlend SB-4
