![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035034.webp)
3 - 6
l I n s t a l l a t i o n
M o u n t i n g t h e L o a d e r s
1
Install the loaders/receivers onto the blender bins.
2
Supply power to the loader as needed.
Refer to the manual the
came with your loader for specific instructions.
3
Supply compressed air to the loader as needed.
Refer to the manual the came with
your loader for specific instructions.
4
Refer to the wiring diagrams
that were shipped with your blender and loaders.
L a y o u t o f t h e M a t e r i a l H o p p e r s
4 position
6 position
Position 1
Position 2
Position 3
Position 4
Position 1 & 2 = Main components
Position 3 & 4 = Additive components
Front door (mix chamber)
Controller location
Position 1
Position 2
Position 4
Position 5
P
o
sition 6
Position 1 & 2 = Main components
Position 3 & 6 = Main or additive
components
Position 4 &5 = Additive components
Position 3
Summary of Contents for TrueBlend SB-4
