![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035121.webp)
S e t u p S c r e e n s
( c o n t i n u e d )
License
Each touch-system has a unique Station Identifier. This identifier is used to unlock features
of the system that require an unlock code in order to enable. The primary required unlock
code is for the station firmware itself. When a feature requires an unlock code, a security
popup window will be presented when the user tries to enable the feature. At this time the
unlock code must be entered. If the code is invalid or unavailable, the popup window will
close and the feature will be disabled.
The Station Identifier must be provided to a Conair representative in order to generate the
unlock code for the feature. Each unlock code is unique for the touch-panel and the feature.
This screen displays the Station Identifier for the current system as well as all entered
unlock codes for the respective features.
NOTE:
During a system firmware upgrade, it may be necessary to re-enter the unlock codes.
Write down the unlock codes before performing any firmware upgrades.
✐
O p e r a t i o n l
4 - 8 3
4
Opera
tion
(Continued)
Summary of Contents for TrueBlend SB-4
