![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035102.webp)
4 - 6 4
l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
Advanced
: This button will present a popup window where additional less frequently used
parameters can be set.
Alarm
This page is for setting up alarm parameters for the batch weigh hopper.
The basic batch hopper alarm settings are:
Parameter
Default
Range
Security
Description
Settling Time
(ms)
2000
[0:9999]
Setup
The amount of time in milliseconds the system will after
a shot of material before the weight reading is taken. This
gives the system some time to settle in order to get a more
accurate value.
Batch Hopper
Control Mode
Gravimetric
Gravimetric
/Volumetric
Setup/Stop
The method by which the batch weigh hopper controls
material throughput.
Enable High
Temperature
Mode
No
Yes/No
Setup
Set to Yes, to force the batch hopper to dump itself out,
then wait to make a new batch once mixer dumps out.
Batch Rate
Update Count
2
[1:20]
Setup
Number of times to make a batch, to average and display
lbs/hr or kg/hr, on Home Page.
Batch Hopper
Name
Batch Hopper [15 charac-
ter string]
Setup
The name given to the batch hopper on the various
screens and in the various reports and data files.
Parameter Default Range
Security Description
Maximum
Time Make
a Batch
0
[0:600] Setup
This parameter specifies the maximum amount of time the system should
take to make a batch. If 0 (default) this parameter is not used. If used this
value should be set long enough for the system to make a batch after a
Material Calculation. The blender may automatically trigger an automatic
material calculation. If this value is to low, then the alarm will falsely trigger.
(Continued)
Summary of Contents for TrueBlend SB-4
