![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035113.webp)
O p e r a t i o n l
4 - 7 5
4
Opera
tion
S e t u p S c r e e n s
( c o n t i n u e d )
Recipients:
This button will present a popup window where the alarm trigger level, email
recipients, and sender email address settings are configured.
The basic email settings are:
SQL Server
The system has the capability of communicating directly with Microsoft SQL Server. This
is accomplished with an Ethernet connection with the SQL Server’s network. The touch-
panel must have its IP Address settings configured to reside on this network (see <IP
Address> screen). This section will configure the connection with the server and the type of
data that will be output to the server. The SQL interface will require an unlock code to
enable. This section will configure the parameters needed to implement the interface. If the
touch-panel cannot communicate with the SQL Server an alarm will be generated.
When the touch-panel first connects with the server it will verify that the Conair database
and the proper tables and relationships have been established within the server. Conair can
provide documentation that shows the contents of the tables and relationship mappings.
Parameter
Default
Range
Security
Description
Receive from Email
Address
NA
[34 character string]
Service/Stop The email address of the touch-screen
(sender email address).
Recipient Enable
No
Yes/No
Service
Enable the recipient to receive email
notifications.
Send to Email Address
NA
[34 character string]
Service/Stop The recipients email addresses. A maxi-
mum of 3 recipients can be configured.
Level to trigger Output
Shutdown Info/ General/ Shutdown Service
The severity level of the alarm that will
trigger a notification email be sent.
NOTE:
The setup of the Microsoft SQL server side is the responsibility of the customers IT depart-
ment. Conair does have an SQL Server interface manual which can be used as a guide in
this process.
✐
NOTE:
Part of SQL Server setup process will be to set up a user within the SQL Server and for the
Conair Database. This interface also requires that dynamic port addressing be disabled for
this connection.
✐
(Continued)
Summary of Contents for TrueBlend SB-4
