![background image](http://html1.mh-extra.com/html/conair/trueblend-sb-4/trueblend-sb-4_user-manual_2649035021.webp)
D e s c r i p t i o n l
2 - 9
2
Description
S P E C I F I C AT I O N S
G R A V I M E T R I C B AT C H B L E N D E R S
TRUEBLEND
TM
TB250R-4
TPBX035-0911
MODELS
TB250R-4
Performance characteristics
Batch size lb {g}
5.5 {2500}
Maximum throughput rate lb/hr {kg/hr}*
850 {386}
Bin capacity - main ingredient ft
3
{liter}
1.6 {45.3}
Bin capacity - minor ingredient ft
3
{liter}
0.3 {8}
Maximum number of materials
4
Number of vertical discharge valves
4
Number/(size) of major bin valves
2 - {60 mm}
Number/(size) of minor bin valves
(removable)
2 - {20 mm}
Dimensions
inches {mm}
A - Height above mounting plate
†
57.75 {1467}
B - Hopper width and depth (square)
36.50 {926}
C - Overall depth
38.88 {988}
D - Control height
6.50 {165.1}
E - Control width
8.75 {222.3}
F - Control depth
6.75 {171.5}
G - Loader center distance
18.44 {468.3}
H - Loader center distance
20.13 {511.2}
I - Loader center distance
15.13 {388.2}
J - Loader center distance
11.25 {285.8}
K - Loader center distance
9.00 {228.6}
Weight
lbs {kg}
Installed
280
Shipping
400
Voltage
total amps
115V/1 phase/60 hz
6.3
230V/1 phase/50 hz
3.2
Compressed air requirements
Discharge valves
90 psi @ 0.2 ft
3
/min
{6 bars @ 0.09 liters/sec};
1/4 in. NPT fitting
Maximum loader sizes
15 inch loaders - number of loaders -
2
8 inch loaders- number of loaders -
2
Top view
§
Front view
Side view
Mounting bolt hole size (8 holes) 9/16 inch {14.0 mm}.
Predrilled 8 x 8 and 12 X 12 mounting pattern as standard.
SPECIFICATION NOTES
*
Maximum throughput rates are based on 35 lb/ft
3
pelletized material,
using all standard valve sizes. Use of reducer inserts will lower the rate
shown.
Throughput rates are based on:
•
A 4-position blender recipe
of 20% regrind, 80% natural, 3% color
and 2% additive material.
†
The optional flow control valve will mount inside the chassis in the space
of the manual slide valve. Conair recommends using the optional flow
control valve when mounting the blender on a stand, surge bin or hopper.
‡
TB250R-4 hopper position two is supplied with a 12-8 adapter with an
eight inch cover plate as standard. Position three and four are supplied
with hand-fill lids.
§
Numbers in top view drawings represent hopper positions.
Specifications may change without notice consult with a Conair representa-
tive for the most current information.
Control
MOUNTING INTERFACE
A
1
C
F
E
D
Dimensions
shown in
inches and {mm}.
4
3
4 position
‡
B
3-5/32
diameter
{80}
16-3/16 sq.{411}
12 sq.{305}
8 sq.{203}
Mixing chamber access door - this side of the interface.
Purchase the
optional
material drain chute
that readily installs to the
chassis opening of the
blender for
fast and sim-
ple cleanout.
Drain chute
1
2
3
4
H
G
I
J
K
Summary of Contents for TrueBlend SB-4
