Conair TrueBlend SB-4, User Manual

Page: 92 / 168

4 - 5 4 l O p e r a t i o n
S e t u p S c r e e n s
( c o n t i n u e d )
Units
All units are represented internally the same
regardless of what unit types are shown on the
display. The touch-panel automatically converts
the internal units to that selected to be shown on
the display. This page is provided to change the
displayed units to either English or Metric val-
ues based on user preferences. The default preci-
sion for displayed units is typically 2 decimal
places. In the Precision frame, the default set-
tings can be changed for individual unit types.
This change affects all devices controlled
through the touch-panel.
The basic Units settings are:
General Frame
Precision Frame
Parameter Default Range Security Description
Units English English/Metric Setup The base number system shown by the touch-panel. If extru-
sion control is enabled, additional settings are provided for key
unit types.
Weight/Length lbs/100ft
; kg/m
lbs/1000ft /
lbs/ft ;
kg/m /
g/m Setup The unit measure for weight of material per a given length of
produced material.
Weight/Area lbs/sq.ft.
kg/sq.m lbs/sqft /
lb/ream;
kgs/sqm /
g/sqm Setup The unit measure of weight of material per a given area of pro-
duced material.
Thickness µm
mm
cm µm /
mm /
cm Setup Available for metric only, the unit measure for a given thick-
ness of material.
Width mm
cm Mm /
cm Setup Available for metric only, the unit measure for a given width of
material.
Parameter Default Range Security Description
Precision 2 [0:3] Setup Typically 2 decimal places of resolution are presented. It is possible to
increase or decrease this value as necessary for several unit types. Fields
are provided to change the displayed resolution for various unit types.
(Continued)