Type A (Receptacle) HDMI
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
Pin 17
Pin 18
Pin 19
TMDS Data2+
TMDS Data2 Shield
TMDS Data2–
TMDS Data1+
TMDS Data1 Shield
TMDS Data1–
TMDS Data0+
TMDS Data0 Shield
TMDS Data0–
TMDS Clock+
TMDS Clock Shield
TMDS Clock–
CEC
Reserved(N.C. on device)
SCL
SDA
DDC/CEC Ground
+5V Power
Hot Plug Detect
HDMI Extender over Single Cat.X with
HDBaseT-Lite, Bi-directional IR and RS-232
User Manual
Safety and Notice
The
CV-57VR
HDMI Extender over Single Cat.X with HDBaseT-Lite,
Bi-directional IR and RS-232
has been tested for conformance to safety
regulations and requirements, and has been certified for international
use. However, like all electronic equipments, the
CV-57VR
should be
used with care. Please read and follow the safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the
unit.
Connect a HDMI or DVI source (such as a Blu-ray Disc player) to
the transmitting unit CV-57VR-TX.
Connect a HDMI or DVI display (such as a LCD TV) to the
receiving unit CV-57VR-RX.
Connect IR Blaster/Receiver to both TX and RX units.
Connect a Cat-5/5e/6 cable between the transmitting and
receiving units.
Make sure this Cat-5/5e/6 cable is tightly connected and not
loose.
Plug in 5V DC power supply unit to the power jack of the
receiving unit CV-57VR-RX and the transmitting unit
CV-57VR-TX.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where
explained in this manual.
Provide proper ventilation and air circulation and do not use near
water.
Keep objects that might damage the device and assure that the
placement of this unit is on a stable surface.
Use only the power adapter and power cords and connection
cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always
unplug the power to the device before cleaning.
HDMI PIN DEFINITION
HARDWARE INSTALLATION
NOTICE
1.
2.
3.
4.
5.
6.
All HDMI over CAT5 transmission distances are measured using
Belden 1583A CAT5e 125MHz UTP cable and ASTRODESIGN Video
Signal Generator VG-859C & VG-870B.
Incorrect placement of IR Blaster and Receiver may result in the
failure of the IR extenders. Please check carefully before plugging in
the IR extender to the respective IR sockets. Warranty will not cover
the damage.
The transmission length is largely affected by the type of Cat-5/5e/6
cables, the type of HDMI sources, and the type of HDMI display. The
testing result shows solid UTP cables (usually in the form of 300m
[1,000ft] bulk cables) can transmit a lot longer signals than stranded
UTP cables (usually in the form of fixed length patch cords).
Shielded STP cables are better suited than unshielded UTP cables. A
solid UTP Cat-5e cable shows longer transmission range than
stranded STP Cat-6 cable. For long extension applications, solid
UTP/STP cables are the only viable choice.
EIA/TIA-568-B termination (T568B) for Cat-5/5e/6 cables is
recommended for better performance.
To reduce the interference among the unshielded twisted pairs of
wires in Cat-5/5e/6 cable, one can use shielded STP cables to
improve EMI problems, which is worsen in long transmission.
Because the quality of the CAT5/6 cables has the major effect on
how long the transmission limit can achieve and how good is the
received picture quality, the actual transmission range is subject to
one’s choice of Cat-5/5e/6 cables. For desired resolutions greater
than 1080i or 1280x1024, a Cat-6 cable is recommended.
If your HDMI display has multiple HDMI inputs, it is found that the
first HDMI input [HDMI input #1] generally can produce better
transmission performance among all HDMI inputs.
1.
2.
3.
4.
5.
6.
7.
Performance Guide for HDMI over Category Cable Transmission
Performance rating
Type of category cable
Wiring
Shielding
CAT5
CAT5e
CAT6
Solid
Unshielded (UTP)
Shielded (STP)
Stranded
Unshielded (UTP)
Shielded (STP)
Termination
Please use
EIA/TIA-568-B
termination (
T568B
) at any time
WARRANTY
The SELLER warrants the
CV-57VR
HDMI Extender over Single
Cat.X with HDBaseT-Lite, Bi-directional IR and RS-232
free from
defects in the material and workmanship for 1 year from the date of
purchase from the SELLER or an authorized dealer. Should this product
fail to be in good working order within 1 year warranty period, The
SELLER, at its option, repair or replace the unit, provided that the unit has
not been subjected to accident, disaster, abuse or any unauthorized
modifications including static discharge and power surge. This warranty
is offered by the SELLER for its BUYER with direct transaction only. This
warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the time of
repair. Such repairs are warranted for 90 days from the day of
reshipment to the BUYER. If the unit is delivered by mail, customers
agree to insure the unit or assume the risk of loss or damage in transit.
Under no circumstances will a unit be accepted without a return
authorization number.
The warranty is in lieu of all other warranties expressed or implied,
including without limitations, any other implied warranty or fitness or
merchantability for any particular purpose, all of which are expressly
disclaimed.
Proof of sale may be required in order to claim warranty.
Customers outside Taiwan are responsible for shipping charges to and
from the SELLER. Cables and power adapters are limited to a 30 day
warranty and must be free from any markings, scratches, and neatly
coiled.
The content of this manual has been carefully checked and is
believed to be accurate. However, The SELLER assumes no responsibility
for any inaccuracies that may be contained in this manual. The SELLER
will NOT be liable for direct, indirect, incidental, special, or consequential
damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. Also, the technical
information contained herein regarding the CV-57VR features and
specifications is subject to change without further notice.
