![background image](http://html.mh-extra.com/html/i-view/epoc-131vaj/epoc-131vaj_installation-manual_603125001.webp)
1
Product Overview:
1.
Extend:
RJ45 Female Connector (No LED) converter allows 10/100 Base-T Ethernet and PoE power to be
transmitted using Cat. 5 or better UTP cable with 4 pair wires.
2.
Link:
The LED indicates the cable link status. The LED will be on after 10 seconds when first connection is
success; Off: No connection.
3.
Pwr:
The LED indicates the power status. On: Power on; Off: No power.
4.
Ethernet/PoE:
RJ45 connector, attaches to POE IP Camera or Hub via Cat5, 5e, 6 or 7 patch cables.
5.
Eth:
The LED indicates the communication status. Flash: Communicate with Traffic; Off: No connection.
6.
Power jack:
Plug DC power adapter to for PoE source when PoE Hub cannot provide enough power source.
7.
PoE:
The LED indicates the PoE power status. On: PoE power is provided; Off: No PoE power.
Packing Checklist:
Check the package box the following items are included:
EPOC-131VAJ (Or EOPC-131PSJ) * 1 ea;
Menu * 1 pc.
Installation Steps:
IP camera end
1.
Connect the IP camera RJ45 connector to the 10/100BaseT Ethernet port of EPOC-131PSJ using a standard
Cat5/6 cable of maximum 100 m (328 feet) in length.
2.
Connect one end of the long UTP cable such as Cat.5, 5e, 6, or 7 cable to the RJ45 (No light) connector of
EPOC-131PSJ.
3.
When the IP camera and EPOC-131PSJ cannot receive power through the UTP cable, even through using the
POE+ Hub or plug DC56V power adapter for EPOC-131VAJ. Plug the DC48V power adapter into the
EPOC-131PSJ will be needed at this end. Please refer to “
Power Distance VS. Cable Impedance
” table.
Switch Hub end
1.
Connect the PoE switch Hub RJ45 connector to the 10/100BaseT Ethernet port of EPOC-131VAJ using a
standard Cat5/6 cable of maximum 100 m (328 feet) in length.
2.
Connect one end of the long UTP cable such as Cat.5, 5e, 6, or 7 cable to the RJ45 (No light) of EPOC-131VAJ.
3.
When the IP camera and EPOC-131PSJ cannot receive power through the Wire cable, please change the POE+
Hub or plug DC56V power adapter to EPOC-131VAJ.
Ethernet/PoE Extender over UTP Cable Installation Guide
V1.2
6
5
4
3
2
1
6
4
2
3
1
5
7