INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TI6AL-160001-A1
IMPORTANT SAFEGUARDS
When using electrical appliances, basics safety precautions should always be
observed including the following:
-Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
-To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.
-Never connect two or more appliances in the same plug.
-When not in use, unplug the blender.
-Avoid starting blender
-Avoid contact with moving parts because blades are sharp. "Handle
carefully".
-Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic
spatula may be used but must be used only when blender is "NOT
RUNNING".
-Only remove the container when blender "COMPLETELY STOPPED".
-
INSTRUCTIONS FOR USE
-Blender control is made by two bottons: * White button (on/off)
* Red button (pulse)
-It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.
-To start blender place small quantity of food before connecting it, and afterwards
complete container placing food through service lid.
-For mixed dry ingredient use the pulse button first.
-When blender is running do not remove the lid.
-If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.
CLEANING PROCEDURE
-Clean container (cup) with liquid soap and water filling to half capacity.
-Turn on blender for some seconds.
-Turn off blender, empty the container and rinse it.
-Unplug blender clean body and external cup with a wet cloth.
-Do not use harsh detergent or chemical products for cleaning.
-To disassemble see Fig1
TI6AL-160001-A1
6AL
6AL
6AL
6AL
CROYDON
CROYDON
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari - Duque de Caxias.
RJ - Brasil - CEP 25243-150 Fax: 55 21 2676-2522
Phone: 55 21 2776-1928 / 55 21 2676-1512
e-mail: [email protected]
