DO
GUIDE
HD-EXT-USB-2000-C
4K HDMI
®
and USB over HDBaseT
®
Extender 2000
DO
Connect the Devices
Make connections to the transmitter and receiver as required.
Connecting the Transmitter
Make connections to the front and rear panels of the transmitter.
Front Panel Connections
Rear Panel Connections
DO
Install the Devices
The Crestron
®
HD-EXT-USB-2000-C consists of the HD-TX-USB-2000-C transmitter and the
HD-RX-USB-2000-C receiver. The transmitter and receiver can be mounted on a flat surface or onto
a rack rail.
Mounting onto a Flat Surface
Using four mounting screws (not included), mount the transmitter and receiver onto a flat surface
such as a wall.
Mounting onto a Wall
Mounting onto a Rack Rail
The transmitter and receiver can be mounted onto the front or rear rail of a rack. Position either the
left or the right mounting flange of the device so that the holes align with the holes in the rack. Then,
secure the device to the rack using two mounting screws (not included).
Mounting onto a Rack Rail
DO
Check the Box
QTY PRODUCT
PART NUM.
HD-TX-USB-2000-C
2
Connector, 2-Pin
2049091
1
Connector, 3-Pin
2049092
1
Connector, 5-Pin
2049093
HD-RX-USB-2000-C
2
Connector, 2-Pin
2049091
1
Connector, 3-Pin
2049092
1
Connector, 5-Pin
2049093
1
Power Pack, 24 Vdc, 1.25 A, 100-240 Vac
2045870
HDMI IN:
From HDMI
®
audio/video
source
AUDIO IN:
From balanced/
unbalanced
analog audio
source
1
AUDIO IN:
From balanced/
unbalanced
analog audio
source
1
(Host):
To USB
device
(Device):
To USB
host
HDBT OUT:
To HDBT IN port
on receiver
IR IN:
From
Crestron
®
IR
control port
or other IR
signal source
3
IR IN:
From
Crestron IR
control port
or other IR
signal source
3
IR OUT:
To IR
emitter
4
IR OUT:
To IR
emitter
4
COM:
To
RS-232
device
2
COM:
To
RS-232
device
2
:
Passive pass-through
to Ethernet port on
receiver
