Model VR448COAX
4-Port PoE Switch with Network Extender
Installation and
Operation Manual
Introduction
The VR448COAX Network Extender is designed to greatly extend the distances to which IP cameras and other
network devices can operate. The VR448COAX Network Extender consists of two units, a 4-port transmitter and a
receiver. Only the transmitter provides PoE to the connected network device. The receiver is installed at the NVR/IP
equipment side and the transmitter at the IP camera side of the installation.
Note: A sticker on the bottom of each unit identifies whether it is the transmitter or the receiver.
NITEK
®
De Schans 19-21 2a
8231 KA Lelystad
Tel: +31(0)320-2300005
Fax: +31(0)320-282186
E-mail: [email protected]
WWW.NITEK.NL
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
EUROPE
072110 681200106
FRONT
POWER
10/100
Data
Status
ETHERNET
COAX
LINK
Type
Speed Off
10
Mbs
LED Green
100
Mbs
Activity Off
No Network
LED
On
Network Detected
Blinking
Network
Activity
Speed Off
10
Mbs
LED
Green 100
Mbs
Activity Off No
Network
LED
On
Network Detected
Blinking Network
Activity
Status Blinking
Establishing
Link
LED
On
Link Established
Type On Transmitter
LED Off Receiver
RECEIVER
TRANSMITTER
ETHERNET PORTS
10/100
Data
10/100
Data
Data
Data
10/100
10/100
Activity Off
No Network
LED On
Network
Detected
Blinking
Network
Activity
Activity Off No
Network
LED
On
Network Detected
Blinking Network
Activity
Speed Off
10
Mbs
LED Green
100
Mbs
Speed Off
10
Mbs
LED
Green 100
Mbs
FRONT
Ground
Connection
NITEK
R
POWER INPUT
48 VDC, 1 Amp max.
COAX
POWER
T
ype
Connected
LINK STATUS
Speed
Type On Transmitter
LED Off Receiver
Status Blinking
Establishing
Link
LED On
Link
Established
BACK
BACK
NITEK
R
POWER INPUT
12-24 AC/DC, 0-100 Hz
Class 2 only, 1 Amp max.
COMMERCIAL
CCTV PRODUCT
40FE
E325724
Ground
Connection
24 AC/DC
