INS_CLFEXCOAX_REV–
09/28/11
PAGE 1
INSTALLATION AND OPERATION MANUAL
CLFE(X)COAX
EthERNEt-OVER-COAX EXtENdER
wIth PASS-thROuGh POE
the ComNet
™
CopperLine CLFE(X)COAX Ethernet over COAX line consists of four
models that support 100Mbps Ethernet as well as Pass-through Power over Ethernet
(PoE) over standard 75Ω coaxial cable. these models support transmission distances
of up to 5,000 feet (1524m) at 10 Mbps, or 1800 feet (548m) at 100 Mbps. the
CLFE1COAX, the CLFE4COAX, CLFE8COAX and the CLFE16COAX transport, one, four,
eight or sixteen channels respectively. the IEEE 802.3-compliant extenders also
meets the requirements for IEEE 802.3af/at PoE power, passing through up to 30
watts of power per port to the powered device (Pd). the CLFE(X)COAX series may also
be used interchangeably with other CopperLine Ethernet-over-Coax extenders.
Environmentally hardened to the requirements of NEMA tS-1/ tS-2 for most out-of-plant
applications, and true plug-and-play design ensures ease of installation and operation.
LEd indicators are provided for rapidly ascertaining the operating status of the
device. See
Figures 7
and
8
on
Page 7
for LEd explanations.
Packaged in a rugged aluminum housing, these units are designed for desktop or stand-
alone mounting. the CLFE8COAX and CLFE16COAX are offered in EIA 19” 1u high rack for
easy installation. See
Figures A
through
C
on
Page 8
for mounting instructions.
See
Figures 1 – 8
for complete installation details.
Important Safety Warning:
Read and keep these directions
heed all warnings
Follow all instructions
do not use this apparatus near water
Clean only with a dry cloth
Install in accordance with the manufacturer’s
instructions
this installation should be made by a qualified
service person and should conform to all local codes
See further safety instructions on Page 8
