Logging out of the phone web interface
Before you begin
Ensure you are logged into the phone web interface.
Procedure
Click
Logout
.
Password for the phone web interface
When you log into the phone web interface for the first time, you must change the password.
Subsequently anytime after the initial log in you can change the password. The new password
must comply with the following new rules:
• The length of the password must be between 8 to 31 characters.
• The password must have at least one numeral, one alphabet, and one special character in
the password.
• The password must have be a maximum of four consecutive characters from the same
character class.
• The password must have be a maximum of two consecutive identical characters.
The allowed character class includes numeric, upper case alphabet, lower case alphabet, and
special character.
The allowed special characters are tilde (~), exclamation mark (!), at (@), pound (#), dollar ($),
percent (%), carat (^), ampersand (&), asterisk (*), underscore(_), minus (-), plus (+), equal (=),
back quote (`), pipe (|), back slash (\), parenthesis (()), braces ({}), brackets ([]), colon (:),
semicolon (;), quote (“), single quote ('), lesser than (<), greater than (>), comma (,), period (.),
question mark (?), forward slash (/).
Note:
The new web admin password rule is available for the phone software version 4.0.5 and later.
You can continue using your old password until you reset it. When you upgrade the phone to
software version 4.0.5 or later, the old password remains valid until you reset it with a new
password that complies with the new password rules.
Changing the default phone web interface password
About this task
When you login to the phone web interface for the first time, it prompts you to change the default
password.
Before you begin
Ensure that your new password complies with the new password rules.
Phone configuration
April 2020
Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment
98