manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 345 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 345

Parameter name

Default value

Description

DISPLAY_SSL_VERSION

0

Specifies whether
OpenSSL and OpenSSH
versions are displayed in
the 

Admin

 menu.

Value operation:

• 0: OpenSSL and

OpenSSH versions are
not displayed.

• 1: OpenSSL and

OpenSSH versions are
displayed.

DNSSRVR

Null

Specifies a list of DNS
server addresses. Valid
values are addresses in
dotted-decimal (IPv4) or
colon-hex (IPv6, if
supported) format,
separated by commas
without spaces.

DOMAIN

Null

Specifies a character
string that will be
appended to parameter
values that are specified
as DNS names, before the
name is resolved.

The value can contain 0 to
255 characters. The
default value is null.

This parameter can be set
through:

• DHCP

• The settings file.

Setting this parameter
through the settings file
overwrites any values set
through DHCP.

Table continues…

List of configuration parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

345

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments