Avaya J100 Series, Installing And Administering, Page: 403 / 528

Parameter name Default value Description
PHONEKEY Null Specifies the list of pre-
configured keys.
For the PHONEKEY
syntax rules and values,
refer to
Pre-configuration
of keys parameter on
page 240 and
PHONEKEY parameter
values
on page 489.
PHONE_LOCK_IDLETIME 0 Specifies the interval of
idle time, in minutes, after
which the phone will
automatically lock.
Value operation:
• 0: Phone will not lock
automatically.
Valid values are 0 through
10,080.
PHONE_LOCK_PASSWORD_FAILED_ATTEMPTS 8 Specifies the number of
consecutive failed
attempts that you permit to
unlock the phone. After
the maximum is reached,
the user will be blocked
from further attempts for a
period of time before being
allowed to attempt again.
If you set the value to 0,
the user will never be
blocked from attempting to
unlock the phone.
PHONE_LOCK_PASSWORD_LOCKED_TIME 5 Specifies the length of
time that you set where
the user will be blocked
from attempting to unlock
the phone if the user
exceeds the maximum
number of failed unlock
attempts.
The value ranges between
5–1440 minutes.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 403
Comments on this document? infodev@avaya.com