manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 442 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 442

Parameter name

Default value

Description

SCEPENCALG

0

Specifies SCEP
Encryption Algorithm.

Value operation:

• 0: DES

• 1: AES-256

Note:

Avaya J129 IP
Phonesupports this
parameter.

SCREENSAVER_IMAGE

N/A

Specifies the screen saver
images those can be
loaded from the
provisioning server.

Maximum five custom
images can be uploaded
onto the phone. Only
the 

.jpeg

 file format is

supported and the
maximum file size is
256KB.

Note that the image file
name is case sensitive.

SCREENSAVER_IMAGE_DISPLAY

N/A

Allows the administrator to
display the desired screen
saver image. Note that if
BACKGROUND_IMAGE_
SELECTABLE is set to 1
then the end user can
override this setting.

Table continues…

Customizable parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

442

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments