Parameter name
Default value
Description
SHORTCUT_ACTION_BLF_PAR
K
0
Specifies the action which is
performed when the Shared
Parking line is activated during an
ongoing call.
Valid values:
• 0: Blind transfer is performed to
the SP extension number.
• 1: The Park FAC and the SP
extension number are dialed.
This option might not be
available in all the
environments.
Selection of a higher priority line after ending a call
You can configure the phone to allow users to select a priority line after ending an active call.
When the feature is enabled, the selected Call Appearance (CA) remains prioritized after ending a
call. The new call is received or initiated on the same CA. The prioritized line remains highlighted
on the user phone screen. The user can manually switch to another line.
When the feature is disabled, after an active call ends, the CA is automatically switched to another
line. The following priority order applies:
• The line with an active call.
• The line with the most recently held call or conference call.
• The line with the most recently held conference call.
• The first available line on the Phone screen.
You can configure this feature through the web interface or through the
46xxsettings.txt
file.
This feature is not supported in CCMS environment.
Note:
Avaya J129 IP Phone does not support this feature.
Selection of a priority line after ending a call parameter
You can configure the following parameters for this feature.
Feature and application configuration
April 2020
Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment
252