manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 486 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 486

Parameter Name

Default Value

Description

WLAN_WPA2E_EAP_PHASE2

N/A

Specifies the pre-configured Wi-Fi
network 802.1x phase 2 Method.
This parameter is only applicable
when WIFISTAT enables Wi-Fi
and WLAN_SECURITY is wpa2e
and
WLAN_WPA2E_EAP_METHOD
is PEAP.

Value operation:

• none- No phase 2

authentication (Default, but not
currently supported)

• MSCHAPV2 : set to this value

for forward compatibility

Note:

Avaya J129 IP Phone, Avaya
J159 IP Phone, and Avaya
J179 IP Phone support a
pluggable Wi-Fi/BT module

WLAN_WPA2E_ANONYMOUS_I
DENTITY

Null

Specifies the pre-configured Wi-Fi
network 802.1x anonymous
identity. This parameter is only
applicable when WIFISTAT
enables Wi-Fi and
WLAN_SECURITY is wpa2e and
WLAN_WPA2E_EAP_METHOD
is PEAP and
WLAN_WPA2E_EAP_PHASE2 is
MSCHAPV2.

The value can contain 1 to 32
characters; Valid characters are:
A-Z, a-z, 0-9, and the following:
*.-!$%&'()+,:;/\=@~ The space
character, ASCII 0x20, is NOT
supported.

Note:

Avaya J129 IP Phone, Avaya
J159 IP Phone, and Avaya
J179 IP Phone support a
pluggable Wi-Fi/BT module

Table continues…

Customizable parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

486

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments